Mobile Secret Codes

Nokia Symbians Secret Codes

Nokia Symbians Secret Codes

Tip 1 : Do u know how to use the edit button (abc or pencil button)?
Heres how... in the inbox for example; u wanna delete multiple sms, simply hold the edit button, scroll down, and then, press c to delete the marked sms. The edit button can also b used to copy and past text in sms, simply hold it and scroll across, choose copy. pretty good for placing song names in ngages

Tip 2 : Shit happens, on a smartphone, its inevitable u do something wrong, and this calls for a format of fone. to format the fone, press *#7370#, then enter the lock code, which is the sec code of the fone. NOTE : batt must b full, else if format is disrupted by low batt, consequences will b disatrous
I heard the code *#7780# works too, pretty much the same i tink.
for 6600 users, to format the fone, theres an alternative way. Press and hold <3>, <*>, and the buttons, then power on fone, keep holding on the 3 buttons, till u come to a format screen. tis method ONLY works on 6600, and need not enter the sec code. BUT sec code wun be reset to default 12345.

There are two kinds of formatting: hard formatting and soft formatting

----------------------------------------------------------------------------------------------------------------------------------------------------

SOFT formatting: This does not realy format your phone (c-drive). It restores ini files from rom but preserves user data (photos, 3rd party apps etc). This is just a normal reset!!

HOW? There are two ways to do a normal reset:

1) *#7780# (this seems to work only on S60 v6.1 and 7.0)

2) Go to Settings, General and scroll down to factorysettings (works on all S60 phones)

------------------------------------------------------------------------------------------------------------------------------------------------------------

HARD formatting: This reformats completely the C-drive. All applications and files stored on this drive will be lost and clean but default files will be rewritten. This is a deep reset.

HOW? Again there are two ways:

1) *#7370#

2) When unable to startup your phone: press and hold the green (talk) key on the left + number 3 on the keypad + the * key and then turn the phone on. This trick works on every S60 v7.0 and it works fine on my 6630 too but without formatting screen...


Tip 3 : TO NGAGE USERS; Did u know u can install .sis files simply using the cable given? Juz plug it in, place the .sis file anywhere on e: (the mmc), not in any folders, root of e:, disconnect, then look for it in manager.

Tip 4: Save on battery and system memory being used by regulary checking the task manager which can be accessed by holding down the menu button!!

Tip 5: Type *#06# to display your IMEI serial number, very valuable for the unlocking your phone to other sim cards...

Tip 6: Save memory when installing apps, by installing over bluetooth. This can be done using the nokia phone suite and a bluetooth serial connection. Only works with .SIS files, so java still has to be sent to the phone, but will save space when using .SIS files.

Tip 7: Operator logos
Use a filemanager like FExplorer or SeleQ to add the folders: "c:/system/Apps/phone/oplogo". Add a .bmp picture to folder "oplogo" and restart your phone! The .bmp picture size needs to be: 97 x 25 pixels

Tip 8: BlueJacking
First up, you need to know what Bluetooth is. There are lots of types of modern devices that incorporate Bluetooth as one of their many features. PDAs, mobile phones and laptops are a few of these modern devices. Bluetooth means that Bluetooth enabled devices can send things like phonebook/address book contacts, pictures & notes to other Bluetooth enabled devices wirelessly over a range of about 10 metres. So, we've got past the boring part. Now, using a phone with Bluetooth, you can create a phonebook contact and write a message, eg. 'Hello, you've been bluejacked', in the 'Name' field. Then you can search for other phones with Bluetooth and send that phonebook contact to them. On their phone, a message will popup saying "'Hello, you've been bluejacked' has just been received by Bluetooth" or something along those lines. For most 'victims' they will have no idea as to how the message appeared on their phone.

Tip 9: While you are viewing a picture in your phone's gallery, press one of these shortcut keys (definitely works on 6600, not sure about other symbians)
1 - turn image anticlockwise
3 - turn image clockwise
* - toggle on/off of full screen
5 - zoom in
0 - zoom out

Tip 10: Operator logos
Use a filemanager like FExplorer or SeleQ to add the folders: "c:/system/Apps/phone/oplogo". Add a .bmp picture to folder "oplogo" and restart your phone! The .bmp picture size needs to be: 97 x 25 pixels

Tip 11: Check if the recepients phone is on
Delivery reports
or
Type *0# your message in the message composer window space then write your message, the recipient will not see the star zero hash bit - just the message When they read it it will relay a message back to your fone showing the time they recieved it. (haven't yet tried it myself though)

A soft and Hard reset
A Soft-reset - the process of resetting all the settings of the phone to the factory default! No applications are deleted! A Hard-reset is like formatting a drive! It does format the memory. Everything that has been installed after the first use of the phone is deleted! It will recover the memory of the phone to the state you purchased it! It is done by inputing the following code: *#7370# NOTE: The battery must be full or the charger has to be connected to the phone so that it does not run out of power and make the phone unusable

Start up in Safe Mode so no 'auto start' apps will be running:
To make sure that no memory-resident programs start when you reboot your phone,
hold down the pencil key when you turn on the phone and hold it on untill you have to enter your PIN code.
(When you have trouble booting up the phone with the MMC in it because it got corrupted for some reason, this trick will
almost always let you boot up the phone so you can remove the latest installed app which might have caused the
problem or if your phone is "unrepairable" you can still back up your important data before you do a format.)

Nokia Symbians Secret Codes

Nokia phones service codes

Motorola Mobile Sets Secret Codes

IMEI number: * # 0 6# 
Net Monitor ON: * * * 1 1 3 * 1 * [OK] 
Net Monitor OFF: * * * 1 1 3 * 1 * [OK] 
* - press this until box shown up 

Samsung Mobile Sets Secret Codes

1. *2767*JAVA# Java Reset and (Deletes all Java Midlets)

2. *2767*MEDIA# Reset Media (Deletes All Sounds and Pics)

3. *2767*WAP# Wap Reset

4. *2767*CUST# Reset Custom EEPR0M

5. *2767*FULL# Reset Full EEPR0M (Caution)

6. For example : *2767*JAVA# would be keyed in as *2767*5282#

Note : Not all codes will work with SGH-C100.

Other Samsung Codes

1. *#06# IMEI code

2. *#9998*4357# Help Menu

3. *#9998*5282# Java menu (GRPS/CSD settings for JAVA server)

4. *#9999#0# Monitor Mode

5. *#9999# or *#9998*9999# Software Version

6. *#8888# or *#9998*8888# Hardware Version

7. *#9998*746# or *#9998*0746# or *#0746# Sim Infos

8. *#9998*523# or *#9998*0523# or *#0523# Display Contrast

9. *#9998*842# or *#9998*0842# or *#0842# Vibration On (until you push OK)

10. *#9998*289# or *#9998*0289# or *#0289# Buzzer On (until you push OK)

11. *#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos

12. *#9998*377# or *#9998*0377# Error log

13. *#9998*778# or *#9998*0778# or *#0778# Sim Service table

14. *#9998*782# show date and alarm clock

15. *#8999*638# show network information

16. *#9998*5646# change operator logo at startup

17. *#9998*76# production number

18. *#9998*968# view melody for alarm

19. *#9998*585# Non-Volatile Memory (NVM)

20. *#3243948# Digital Audio Interference Off

21. *#32436837# Digital Audio Interference On

 

SAMSUNG T100 SECRET CODES
============================

*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0001# -> Show Serial Parameters

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!!!! but also change IMEI to 447967-89-400044-0, you must use CHGIMEI to restore it)

*2767*2878# -> Custom EEEPROM Reset
*#8999*228# -> Battery status (capacity, voltage, temperature)
*#8999*246# -> Program status
*#8999*289# -> Change Alarm Buzzer Frequency
*#8999*324# -> Debug screens
*#8999*364# -> Watchdog
*#8999*377# -> EEPROM Error Stack
*#8999*427# -> Trace Watchdog
*#8999*523# -> Change LCD contrast
*#8999*544# -> Jig detect
*#8999*636# -> Memory status
*#8999*746# -> SIM File Size
*#8999*778# -> SIM Service Table
*#8999*785# -> RTK (Run Time Kernel) errors
*#8999*786# -> Run, Last UP, Last DOWN
*#8999*837# -> Software Version
*#8999*842# -> Test Vibrator
*#8999*862# -> Vocoder Reg
*#8999*872# -> Diag
*#8999*947# -> Reset On Fatal Error
*#8999*999# -> Last/Chk
*#8999*9266# -> Yann debug screen (=Debug Screens?)
*#8999*9999# -> Software version
 

SAMSUNG V200 SECRET CODES

v200 Unlock Code-> *2767*7822573738#

*#9324# Netmon (press the hangup key to exit)
*#9998*JAVA# Edit GPRS/ CSD settings (S100 Only)
*#9998*Help# Help screen/ List of codes
*#9998*LOGO# Change operator Logo
*#9998*RTC# RTC Display
*#9998*Bat# Battery Status
*#9998*Buz# Turns Buzzer ON
*#9998*Vib# Turns Vibrator ON
*#9998*LCD# LCD Contrast
*#9998*9999# Softwre Version
*#9998*8888# Hardware Version
*#9998*377# NVM Error Log (?????)
*#9998*NET# SIM Network ID
*#9998*778# SIM Serv. Table
*#9998*SIM# SIM Info
*#9998*PN# Production No.
*#9998*968# Reminder Tune
*#9998*NVM# Displays Non-Volitile Memory Status
*#9999*C# ???????????????????
*#06# Displays phones I**I No.

***/// ***/// NOTE /// *** RED COLOR , they appear serious !!! Use at
own risk !!!

*#9998*2576# Forces SIM Error
*#9998*DEAD# Forces Phone Crash
*2767*MEDIA# Resets the medis on the phone (deletes all downloaded
pics/tones)
*2767*FULL# Resets the EEPRON *DANGEROUS*
*2767*CUST# Resets the Custom EEPRON
*2767*JAVA# Resets JAV downloads (deletes all downloaded midlits)
*2767*STACKRESET# Resets Stack
*2767*225RESET# ????????????????? * Dangerous *
*2767*WAP# Resets WAP Setting & Deletes Favorites

SAMSUNG A800 SECRET CODES

The universal unlock code is *2767*637# do this with out your sim in

By default, the firmware (software) for x600 only receives java
apps and other applications like stuff by serial port.
but even for it, you have to enable the serial port, which also
causes
the closing of all other ports, even the IrDA too :-( ..

well, guess what, i have very good news for you,
do you know, you can increase the sound level,
the sound level for tones, speaker fone, etc,
can be increase even then if it is at max (level 4)

you still can do it,
just follows the instructions!

**************** HERE WE GO **************

Enter the following code:

*#8999*8378#
(You'll be shown menu, then ...)

then go to:

"H/W test"

then go to:

"Audio Settings"

then go to:

"Melody Gain"

There will you see a number.
there are five (5) Melody Levels" of it.
(and currently, you are at level 1 and after
pressing the "save" button, you will move to
level 2 and so on .........................)

you have to change the values of all the levels.
and as the resultant, it will give increase the
melody sound!, your tones will more louder,
even more louder then the max. ringing volume.

the level wise numbers are: (as its my setting :-) )

Melody Level 1: 13

Melody Level 2: 17

Melody Level 3: 18

Melody Level 4: 25

Melody Level 5: 31

you even can make your own combinations of level wise
sounding numbers that can change the sound level!.

if your combination cause more louder sound level,
then mine,
then do share it with the group! ... :-)
meanwhile, try my figured-out combination!

 

************ CAUTION ************

if anything goes wrong,
then you can apply the master reset code,
that will NOT delete anything, ANYTHING from your
cell fone, but set each and eveything to its
default/standard setting ...
(likes, factory settings :-) )

the master reset code is:

#*7728#

#########################################
I take no responsibility of these codes are working or not,
or its effects on your cell fone
but i have tried these codes on my cell fone.
and i bet, nothing goes wrong,
but even then of my words, be carefull!,
#########################################

The code: *#8999*8378#
as i regarded it a informative code,
will tell you each and everything about your cell fone.
and in the "H/W test",
there are lot of other Audio settings,
each of them having five (5) levels,
you can change the combination, but before doing anything,
do write the defult number sequence to some place so that
you'll be then able to invert it again! .. :-) ...

#*2558# - Time ON
#*2527# - GPRS Switching Set to class {4/8/9/10}
#*4263# - Handsfree Mode: ACTIVATED
#*53696# - [Java dnload] WAPSAR mode
#*536961# - WAPSAR enable HTTP disable
#*536962# - HTTP enable WAPSAR disable
#*536963# - SERIAL enable Others disable
#*5663351# - [Phone Model] SAMSUNG SGH-X100
#*6420# - Mic off
#*6421# - Mic on
#*7632# - Sleep mode
*#8999*523# - Main LCD Brightness
*#8999*3825523# - (?) External display
*2767*3855# - Full EEPROM reset(Reset all type of locks)also you'll
lose pictures and java not melody

Remove camera sound:

On main screen type:

*#8999*8378# --> Test mode

H/W test
Audio Settings
Melody Gain

Then replace 6 by 0, it'll show 12 but it's OK
Press back until main screen
Then press key volume to minimum and let's try !!! no more sound
tip by C-Quest

*2767*688# resets the phone

Thats all!!!!!!!!!!!!!!!

Samsung X100 Tricks

#*0000#
#*0400#
#*1200# - AFC DAC Val
#*1300# - IMEI
#*1400# - IMSI
#*1700# - ( ) Command #*1700 Executed
#*1800# - ( ) Command #*1800 Executed
#*1900# - ( ) Command #*1900 Executed
#*2000# - ( ) Command #*2000 Executed
#*2100# - ( ) Command #*2100 Executed
#*2200# - ( ) Command #*2200 Executed
#*2252# - Current CAL
#*2255# -
#*2256# - Calibr.-Info
#*2282#
#*2285#
#*2286# - Databattery
#*2337# - ( ) Permanent Registration - Not Yet Implemented
#*2355#
#*2400# - ( ) Command #*2400 Executed
#*2474# - For CMD Set - DEBUGBATTERY in cihard.opt
#*2527# - GPRS Switching Set to class {4/8/9/10}
#*2558# - Time ON
#*2562#
#*2565#
#*2677# - AMR State: {None / Full Rate}
#*2679# - Copycat Feature: {ACTIVATED/DEACTIVATED}
#*2787# - CRTP {ON/OFF}
#*2834# - Audio path Mobile Normal
#*2836# - AVDDSS Management: {DEACTIVATED/ACTIVATED}
#*3230# - Trace Enable DCD disable
#*3231# - Trace disable DCD Enable
#*3232# - Current Mode {Trace enabled/DCD enabled}
#*3270# - DCS Support: {DEACTIVATED/ACTIVATED}
#*3282# - Data: {DEACTIVATED/ACTIVATED}
#*3333#
#*3353# - General Defence Code Erased
#*3370#
#*3377#
#*3476# - EGSM: {DEACTIVATED/ACTIVATED}
#*3676# - Flash Volume Formated
#*3683#
#*3737# - Some Codes
#*3777#
#*3779#
#*3825# - ( ) Command #*3825 Executed
#*3837#
#*3849#
#*3851#
#*3876#
#*3877# - Dump of SPY Trace
#*3900#
#*3940# - External looptest 9600 bps not available in SYSOL2
#*3940# - External looptest 115200 bps not available in SYSOL2
#*3941#
#*4200#
#*4263# - Handsfree Mode: ACTIVATED
#*4300#
#*4500#
#*4674# - IMSI| MCC:2 5 0 | MNC 9 2 | 10 11 91 83 50
#*4700# - Half Rate: {ACTIVATED/DEACTIVATED}
#*4760# - GSM: {ACTIVATED/DEACTIVATED}
#*4864#
#*5100#
#*5111# - ( ) Some Codes
#*5132#
#*5133# - ( ) Some Codes
#*5143#
#*5156#
#*5165#
#*5171# - ( ) Some Codes
#*5172# - ( ) Some Codes
#*5173# - ( ) Some Codes
#*5174#
#*5175#
#*5176# - ( ) Some Codes
#*5177#
#*5187# - L1C2G trace: {ACTIVATED/DEACTIVATED}
#*53696# - [Java dnload] WAPSAR mode
#*536961# - WAPSAR enable HTTP disable
#*536962# - HTTP enable WAPSAR disable
#*536963# - SERIAL enable Others disable
#*5376#
#*5400# - ( ) Command #*5400 Executed
#*5500#
#*5600#
#*566335# - [WAP model ID]
#*5663351# - [Phone Model] SAMSUNG SGH-X100
#*5663352# - [Java Model] SEC-SGHS300/1.0
#*5737425# - Java Serial
#*577699# - APN
#*5800# - ( ) Command #*5800 Executed
#*6100# - ( ) Command #*6100 Executed
#*6200#
#*6420# - Mic off
#*6421# - Mic on
#*6422# - Mic dep RXdata
#*6428# - Mic measurement
#*6700#
#*6837# - Official Software Version
#*6900#
#*7200#
#*7222# - Operation Typ: Class C GSM
#*7224# - ERROR
#*7247#
#*7252# - Operation Typ: Class B GPRS
#*7271# - Multi slot: Class 1 GPRS
#*7274# - Multi slot: Class 4 GPRS
#*7276#
#*7284# - Class B
#*7287# - GPRS Attached
#*7288# - GPRS Detached
#*7326# - Accessory: Vibrator
#*7337# - Some kind of Reset Settings
#*7352# - Some Kind of Debug Info
#*7462# - SIM phase
#*7524# - KCGPRS
#*7562# - LOCI GPRS
#*7636#
#*7639#
#*7632# - Sleep mode
#*7633#
#*7638# - RLC always open ended TBF: {ACTIVATED/DEACTIVATED}
#*7646#
#*7665#
#*7666# - SrCell Data
#*7673# - Sleep mode
#*7676# - Command #*7676 Executed
#*7683# - Sleep variable
#*7693# - Sleep deact
#*7728# - RSAV done->reset
#*7763# - SMS bearer CS {ACTIVATED/DEACTIVATED}
#*7825#
#*7828# - Midl Rl51
#*7957# - Command #*7957 Executed
#*7983# - Voltage/Freq {DEACTIVATED/ACTIVATED}
#*7986# - Voltage {DEACTIVATED/ACTIVATED}
#*8462# - Sleep time since SwitchOff
#*8465# - Time in L1
#*8466# - Old Time
#*8645#
#*9278# - Command #*9278 Executed
#*9795# - wtls key: reset
#7263867# - RAM Dump {On/Off}
#7465625*228# - Activa lock deactivated
#7465625*27*
#7465625*2827# - Auto CP lock deactivated
#7465625*28638# - Auto Network lock deactivated
#7465625*28746# - Auto SIM lock deactivated
#7465625*2877# - Auto SP lock deactivated
#7465625*28782# - Auto subset lock deactivated
#7465625*638*
#7465625*746*
#7465625*77*
#7465625*782*
#8999*324#
*#0*
*#0020# –
*#06# – IMEI
*#2255# - Call List
*#4777*8665# – GPRS
*#7465625# – Interrogate ( )
*#8377466# – Software && Hardware Versions
*#8888# – Hardware Version
*#8999*324# - ( ) Some Strange Numbers
*#8999*377# -
*#8999*3825523# - ( )
*#8999*523# - Main LCD Brightness
*#8999*636# - ( ) Another Strange Numbers
*#8999*8376363# - . HW, SW, + Some Code And Data
*#8999*8378# - . , , , HW SW
*#9999# – Software Version

=== : ===

*2767*xx927 - WAP . xx - . , xx=44: *2767*44WAP# xx=31: *2767*31WAP#

*2767*xx667 - MMS.

.

*2767*2877368#
*2767*2878# – EEPROM ( , )
*2767*31667#
*2767*31927#
*2767*33667#
*2767*33927#
*2767*34667#
*2767*34927#
*2767*351667#
*2767*351927#
*2767*3700#
*2767*380667#
*2767*380927#
*2767*3855# - l EEPROM ( SP- !! ) IMEI 447967-89-400044-0, IMEI ( )
*2767*39667#
*2767*39927#
*2767*420667#
*2767*420927#
*2767*43667#
*2767*43927#
*2767*44667#
*2767*44927#
*2767*46667#
*2767*46927#
*2767*49667#
*2767*49927#
*2767*66335#
*2767*688# ( ) [Unlocking Code]
*2767*7100#
*2767*7300#
*2767*73738927# = *2767*RESETWAP#
*2767*7650#
*2767*7667#
*2767*7927#
*2767*8200#
*2767*927#

=== / : ===

*335#
*663867# - mm file dumped
*7465625# -
*7465625*228# - Activa lock personalized
*7465625*27*
*7465625*2827# - Auto CP lock activated
*7465625*28638# - Auto Network lock activated
*7465625*28746# - Auto SIM lock activated
*7465625*2877# - Auto SP lock activated
*7465625*28782# - Auto subset lock activated
*7465625*638*
*7465625*746
*7465625*746*
*7465625*77*
*7465625*782*

Samsung 811 Mobile Sets Secret Codes

47*869#08#9 

- unlock code / change roaming code / ID

Samsung SGH-600 And SGH-2100 Mobile Sets Secret Codes

*#06# -> Show IMEI 
*#9999# -> Show Software Version 
*#0837# -> Show Software Version (instructions) 
*#0001# -> Show Serial Parameters 
*#9125# -> Activates the smiley when charging. 

*#9998*228# -> Battery status (capacity, voltage, temperature) 
*#9998*246# -> Program status 
*#9998*289# -> Change Alarm Buzzer Frequency 
*#9998*324# -> Debug screens 
*#9998*364# -> Watchdog 
*#9998*377# -> EEPROM Error Stack - Use side keys to select values.
 Cancel and ok. 
*#9998*427# -> Trace Watchdog 
*#9998*523# -> Change LCD contrast - Only with version G60RL01W 
*#9998*544# -> Jig detect 
*#9998*636# -> Memory status 
*#9998*746# -> SIM File Size 
*#9998*778# -> SIM Service Table 
*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset,
 info is put
 in memory error. *#9998*786# -> Run, Last UP, Last DOWN 
*#9998*837# -> Software Version 
*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds
 and vibration activated. 
*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected 
*#9998*872# -> Diag 
*#9998*947# -> Reset On Fatal Error 
*#9998*999# -> Last/Chk 

*#9998*9266# -> Yann debug screen (=Debug Screens?) 
*#9998*9999# -> Software version 

*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete) 
*0002*?# -> unknown 
*0003*?# -> unknown 

SP-unlock SGH-600 and SGH 2100 

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! ) 
But also changes IMEI to 447967-89-400044-0, To restore your old IMEI
 use the
 IMEI program found on the software page. 

*2767*2878# -> Custom EEEPROM Reset 

These codes has been tested with version FLD_2C6 G60SB03X of Samsung
 SGH-600 

Ericsson Mobile Sets Secret Codes

IMEI number: * # 0 6 # 
Software version: > *  
Dafault Language:  
Enter to phone menu without SimCard - after Wrong PIN: press NO:
* * 0 4 * 0 0 0 0 * 0 0 0 0 * 0 0 0 0 # 
Information about SIMLOCK: 

Philips Mobile Sets Secret Codes

IMEI number: * # 0 6 # 
Simlock info: * # 8 3 7 7 # 
Security code: * # 1 2 3 4 # (Fizz) or * # 7 4 8 9 # 

Siemens Secret Codes

IMEI number: * # 0 6 # 
Software version: put off sim card and enter:: * # 0 6 # (and press LONG 
KEY) 
Bonus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1 
Net Monitor (S4 Power): Menu 9 8, left SoftKey, 7 6 8 4 6 6 6, Red phone
,Menu 5 6 

Siemens S1 / S3 / S3 COM / S4 Secret Codes

To view the software date and else with S3 com, S4, S4Power 
press with SIM removed *#06# and left softkey. 

To view some other stuff with S4Power 
press with SIM removed *#06# and left softkey twice. 

To view the software date with S3 com, S4, S4Power 
press with SIM installed menu 98 and left softkey twice. 

ACTIVATE MONITOR MODE 

Siemens S1/S3 

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left
 MENU key), 
5553756, HangUp Button (Red HandSet key) 

Siemens S3 COM/S4 

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button 
(left MENU key), 7684666, HangUp Button (Red HandSet key) 

Note: Now Monitor should appear at the bottom of the Network Options menu. 

MONITOR MODE 

Pressing the right Display Button when in monitor mode will toggle into 1
 and
 2 modes 

Pressing the right Display Button when in monitor mode will show a 
list of the six cells with the strongest signals. 

Test Mode Indicators: (* = only available when call in progress ) 

CH Channel Number 

RX Signal Strength (dB) 

N NCC (Colour Code) 

B BCC (Colour Code) 

CI Cell ID (in Hex) 

C1+ How long before phone does forced hand over.(see RX and RXAM) 

LAI Location Area Identity. Display Network ID code(42F010 = 240.01) and
 MSC 

TXPWR Transmit Power (dB) 

RXAM Receive signal strength cut-off point 

TS* Time Slot Number 

TA* Timing Advance. Distance from tower in Km X 2 

PL* Power Level 
SIEMENS S1 

Here's a trick to play Tetris, also known as Klotz on a Siemens S1. 
Turn the phone on. Enter PIN. Before the telephone has logged in to the 
your GSM net do the following steps. 

1: Choose F 9 (function settings) 
2: Choose send own number and push the right button for choose. 
3: Push 9 

USE 2 as < and 8 as > , rotate the klotz with 5 and drop with 4. 

I have just heard from one of the programmers of the phone that Tetris 
was in the phone during development, but it was removed before it was 
produced. 
Apparantly someone has the patent on games in mobile phones and Siemens 
didn't want to pay the licensing fees. It was either in Menu F-9-9 or it's
 not
 there at all.

Siemens C-25 Secret Codes

SP unlock *#0003*(secret code 8 digits)# 

*#06# for checking the IMEI (International Mobile Equipment Identity) 

Resets language to automatic selection : * # 0000 # then Green button 

Pin Out 

1- GND 
2- SB 
3- POWER 
4- NC 
5- TX 
6- RX 
7- CLOCK 
8- DATA 
9- GND MIC 
10- HF MIC 
11- AUDIO 
12- GND AUDIO

Siemens S1 Secret Codes

SP unlock *#0003*(secret code 8 digits)# 

*#06# for checking the IMEI (International Mobile Equipment Identity) 

Tetris 
Power on phone and enter PIN. before phone has locked onto network, 
F9, send own number, hit right button, hit 9. left is 2, right is 8,
 rotate is 5, and drop is 4. 

Monitor Mode 
1. Menu 
2. 9 (Phone Options) 
3. 7 (Phone Status) 
4. Left Display Button (left MENU key) 
5. 5553756 
6. HangUp Button (Red HandSet key) 

Now "Monitor" should appear at the bottom of the Network Options 
menu. Pressing the right Display Button when in monitor mode will
 show a list of the six cells with the strongest signals. Test 
Mode Indicators: (* = only available when call in progress ) 

CH Channel Number 
RX Signal Strength (dB) 
N NCC (Color Code) 
B BCC (Color Code) 
CI Cell ID (in Hex) 
C1+ how long before phone does forced hand over. (see RX and
 RXAM) 
LAI Location Area Identity. Display Network ID code
 (42F010 = 240.01) and MSC 
TXPWR Transmit Power (dB) 
RXAM Reeceive signal strength cut-off point 
TS* Time Slot Number 
TA* Timing Advance. Distance from tower in Km * 2 
PL* Power Level 

Power Table 
PL: 5 6 7 8 9 10 11 12 13 14 15 
dB: 33 31 29 27 25 23 21 19 17 15 13 
Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02 

LF* C1 value with continuous transmisson from tower 
LS* C1 Value with discontinuous tranmission from tower 
QF* Bit Error Rate with continuous transmission from tower 
QS* Bit Error Rate with discontinuous transmission from tower 

BER (bit error rate) table 
QF/QS register: 0 1 2 3 4 5 6 7 
% of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6 

Tips and tricks 

Nice Sunset in the display. Siemens S3 or younger 
In the Telephone Book in the section own numbers, first position
 you have to type in +12022243121 (Number of the Capitol in
 Washington DC) and save it without a name. Then open this
 telephone book again do so as you like to change the number
 but leave the modus without changing anything. A nice Sundown
 will be shown in the display. 

Pin Out 

1- GND 
2- SB 
3- POWER 
4- NC 
5- TX 
6- RX 
7- CLOCK 
8- DATA 
9- GND MIC 
10- HF MIC 
11- AUDIO 
12- GND AUDIO

Siemens S3 S3 Comfort Secret Codes

SP unlock *#0003*(secret code 8 digits)# 

*#06# for checking the IMEI (International Mobile Equipment Identity) 

Tetris 
Power on phone and enter PIN. before phone has locked onto network, F9,
 send own number, hit right button, hit 9. left is 2, right is 8, rotate
 is 5, and drop is 4. 

Monitor Mode 
1. Menu 
2. 9 (Phone Options) 
3. 7 (Phone Status) 
4. Left Display Button (left MENU key) 
5. 5553756 
6. HangUp Button (Red HandSet key) 

Now "Monitor" should appear at the bottom of the Network Options menu.
 Pressing the right Display Button when in monitor mode will show a list
 of the six cells with the strongest signals. Test Mode Indicators:
 (* = only available when call in progress ) 

CH Channel Number 
RX Signal Strength (dB) 
N NCC (Color Code) 
B BCC (Color Code) 
CI Cell ID (in Hex) 
C1+ how long before phone does forced hand over. (see RX and RXAM) 
LAI Location Area Identity. Display Network ID code (42F010 = 240.01)
 and MSC 
TXPWR Transmit Power (dB) 
RXAM Reeceive signal strength cut-off point 
TS* Time Slot Number 
TA* Timing Advance. Distance from tower in Km * 2 
PL* Power Level 

Power Table 
PL: 5 6 7 8 9 10 11 12 13 14 15 
dB: 33 31 29 27 25 23 21 19 17 15 13 
Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02 

LF* C1 value with continuous transmisson from tower 
LS* C1 Value with discontinuous tranmission from tower 
QF* Bit Error Rate with continuous transmission from tower 
QS* Bit Error Rate with discontinuous transmission from tower 

BER (bit error rate) table 
QF/QS register: 0 1 2 3 4 5 6 7 
% of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6 

Unlock Siemens S3(Not S3 COM) 
(For advanced users only) 

At addresses 0D8 to 0DD the phones code is stored. To read the code
 swap nibbles stored at addresses from 0DA to 0DD. Error counter is
 at 0D9. To clear the Phone Code write at addresses from 0D8 to 0DD:
 00, 00, FF, FF, FF, FF. 

Siemens S3 comfort 

Show IMEI code: * # 06 # 

MONITOR MODE 
The Siemens S3 Com series have a Monitor mode that can be activated
 directly from the standard user keypad. In order to activate this
 mode, you must enter the special access code currently programmed
into the phone. 

TO ACTIVATE MONITOR MODE 
1. Turn the phone on. 
2. Enter the PIN access code on press OK. (Only if is enabled). 
3. Press Menu. (Left top button). 
4. Press 9. (Phone Options). 
5. Press 8. (Phone Status) (May be button 7 in some phones). 
6. You may see your IMEI Number 
7. Left Display Button (Top left MENU key). 
8. 7684666 
9. HangUp Button. (Red HandSet key). 

Note: Monitor should appear now at the bottom of the Network Options
 menu. 

MONITOR MODE TOGGLE 
Pressing the right Display Button when in monitor mode will toggle
 into 1 and 2 modes 

Tips and tricks 

Nice Sunset in the display. Siemens S3 or younger 
In the Telephone Book in the section own numbers, first position you
 have to type in +12022243121 (Number of the Capitol in Washington DC)
 and save it without a name. Then open this telephone book again do
 so as you like to change the number but leave the modus without changing
 anything. A nice Sundown will be shown in the display. 

Pin Out 

1- GND 
2- SB 
3- POWER 
4- NC 
5- TX 
6- RX 
7- CLOCK 
8- DATA 
9- GND MIC 
10- HF MIC 
11- AUDIO 
12- GND AUDIO

Sony Mobile Sets Secret Codes

IMEI number: *#06# 
Software version: *#8377466# 
Show list of product creator names: (you must save this number in
 your Phone Book with "own phone no." record): + 1 2 0 2 2 2 4 3 1 2 1 

Sony C1 Secret Codes

The Service provider (SP) lock is used to lock the cell phone to the
 SP's SIM card. Once the cell phone is locked to a specific operator,
 if one inserts a SIM card from a different operator the phone will 
refuse to accept it! The cell phone will however accept another SIM 
card from the same operator. 

Remove SP lock (For advanced users only) 
Just edit your eeprom and at the address 16b-1D8 fill this address
 with 00. 

enter codes from normal network screen, when you press the last #
 it will show the sim data, and network lock status, as for the
 language selecets, when you press the last #, the phone will return
 to the normal network screen using a different language 

*#7465625# - display sim information (use to check eeprom editing
 worked) 
*#0001# set language to english

Sony CMDX 1000 Secret Codes

Show Software date Following procedure will show on your phone the
 software date. Remove your SIM Card, then press: 

* # 06 # 

and finally press: 

[left softkey] 

To enter Monitor Mode on Network Option menu 
1. Menu 9 (Phone Options) 
2. 7 (Phone Status) 
3. [Left Display Button] (left MENU key) 
4. 7684666 
5. [HangUp Button] (Red HandSet key) 

The Service provider (SP) lock is used to lock the cell phone to the
 SP's SIM card. Once the cell phone is locked to a specific operator,
 if one inserts a SIM card from a different operator the phone will
 refuse to accept it! The cell phone will however accept another SIM
 card from the same operator.

Sony Mobile Sets Secret Codes

To view IMEI (International Mobile Equipment Identity) number
 enter *#06# 

Show Software version and manufact. date Following procedure
 will show on your phone the software version in first row of
 the display and some CPU and OS info on the second and third
 one. # 8377466 # (#version#) 

On earlier version the above tip may not work, but you can try
 this one: 
In the menu go to PHONE SETTINGS 
Jog down to: FACTORY SETTINGS and CLICK ONCE 
You will see a display "Factory Setting Yes No" . Don’t do
 anything with this display, leave it as it is. 
Move the main switch of the phone briefly to the right (briefly
 means long enough to secure a short electric contact BUT short
 enough not to switch off the phone!) 
Now you key in the following sequence: 
# * 0 4 Will display info about sw (?) 

The Service provider (SP) lock is used to lock the cell phone
 to the SP's SIM card. Once the cell phone is locked to a
 specific operator, if one inserts a SIM card from a different
 operator the phone will refuse to accept it! The cell phone will
 however accept another SIM card from the same operator. 

GSM Mobiles Standard Secret Codes

The following codes are the standard GSM codes for various network
 services. Most Nokia phones have easier ways to activate them
 through the menus. Check the guides for your model. 

Call Diverting

All 
To Activate: * * 21 * NUMBER # [SEND] 
To Cancel: # # 21 # [SEND] 
To Check: * # 21 # [SEND] 
No Answer 
To Activate: * * 61 * NUMBER # [SEND] 
To Cancel: # # 61 # [SEND] 
To Check: * # 61 # [SEND] 
Unreachable 
To Activate: * * 62 * NUMBER # [SEND] 
To Cancel: # # 62 # [SEND] 
To Check: * # 62 # [SEND] 
Busy 
To Activate: * * 67 * NUMBER # [SEND] 
To Cancel: # # 67 # [SEND] 
To Check: * # 67 # [SEND] 
To Cancel All Call Forwarding # # 002 # [SEND] 

Diverting Data Calls

All 
To Activate: * * 21 * NUMBER * 25 # [SEND] 
To Cancel: # # 21 # * 25 [SEND] 
To Check Status: * # 21 # * 25 # [SEND] 
No Answer 
To Activate: * * 61 * NUMBER * 25 # [SEND] 
To Cancel: # # 61 * 25 # [SEND] 
To Check Status: * # 61 # * 25 # [SEND]  
Unreachable 
To Activate: * * 62 * NUMBER * 25 # [SEND] 
To Cancel: # # 62 # * 25 # [SEND] 
To Check Status: * # 62 # * 25 # [SEND] 
Busy 
To Activate: * * 67 * NUMBER * 25 # [SEND] 
To Cancel: # # 67 # * 25 # [SEND] 
To Check Status: * # 67 # * 24 # [SEND] 

Diverting Fax Calls

All 
To Activate: * * 21 * NUMBER * 13 #[SEND] 
To Cancel: # # 21 # * 13 # [SEND] 
To Check Status: * # 21 # * 13 # [SEND] 
No Answer 
To Activate: * * 61 * NUMBER * 13 # [SEND] 
To Cancel: # # 61 * 13 # [SEND] 
To Check Status: * # 61 # * 13 # [SEND] 
Unreachable 
To Activate: * * 62 * NUMBER * 13 # [SEND] 
To Cancel: # # 62 # * 13 # [SEND] 
To Check Status: * # 62 # * 13 # [SEND] 
Busy 
To Activate: * * 67 * NUMBER * 13 # [SEND] 
To Cancel: # # 67 # * 13 # [SEND] 
To Check Status: * # 67 # * 13 #[SEND] 

Call Barring

Before you can activate these barring services you will need
 a barring code from your service provider. Call Barring can
 not be activated if Call Forwarding diverts are already in use. 

All Calls 
To Activate: * 330 * BARRING CODE # [SEND] 
To Cancel: # 330 * BARRING CODE # [SEND] 
To Check: * # 330 # [SEND] 
All Outgoing Calls 
To Activate: * 333 * BARRING CODE # [SEND] 
To Cancel: # 333 * BARRING CODE # [SEND] 
To Check: * # 333 # [SEND] 
All Incoming Calls 
To Activate: * 353 * BARRING CODE # [SEND] 
To Cancel: # 353 * BARRING CODE # [SEND] 
To Check: * # 353 # [SEND] 
All Outgoing Calls 
To Activate: * 33 * BARRING CODE# [SEND] 
To Cancel: # 33 * BARRING CODE # [SEND] 
To Check: * # 33 # [SEND] 
All Outgoing International Calls 
To Activate: * 331 * BARRING CODE# [SEND] 
To Cancel: # 331 * BARRING CODE # [SEND] 
To Check: * # 331 # [SEND] 
All Outgoing International Calls Except To Home Country 
To Activate: * 332 * BARRING CODE# [SEND] 
To Cancel: # 332 * BARRING CODE # [SEND] 
To Check: * # 332 # [SEND] 
All Incoming Calls 
To Activate: * 35 * BARRING CODE # [SEND] 
To Cancel: # 35 * BARRING CODE # [SEND] 
To Check: * # 35 # [SEND] 
All Incoming Calls When Outside Home Country 
To Activate: * 351 * BARRING CODE # [SEND] 
To Cancel: # 351 * BARRING CODE # [SEND] 
To Check: * # 351 # [SEND] 
Canceling All Call Barring # 330 * BARRING CODE # [SEND]  

Call Waiting

To Activate: * 43 # [SEND] 
To Deactivate: # 43 # [SEND] 
To Check: * # 43 # [SEND] 

Calling Line Identity

Outgoing 
To Activate: * 31 # [SEND] 
To Deactivate: # 31 # [SEND] 
To Check: * # 31 # [SEND] 
Incoming 
To Activate: * 30 # [SEND] 
To Deactivate: # 30 # [SEND]

Secret Phone Codes Do you want to know what version of SW do you have in phone? IMEI number?

Below you have got secret codes for your cellphone. With this codes you can without any problem check IMEI, software version, reset to default language or deactivate simlock (only in some models). Some of codes that you got below must by typed without SIM card in cellphone and some with SIM card in phone. Please be cerfull - with some codes you may PERMENANTLY block your cellphone.

Alcatel
IMEI number:	* # 0 6 #
Software version:	* # 0 6 #
Net Monitor:	0 0 0 0 0 0 *
Bosch
IMEI number:	* # 0 6 #
Dafault Language:	* # 0 0 0 0 #
Net Monitor:	* # 3 2 6 2 2 5 5 * 8 3 7 8 #
Dancall
IMEI number:	* # 0 6 #
Software version:	* # 9 9 9 9 #
SIMcard serial number:	* # 9 9 9 4 #
Information about battery status:	* # 9 9 9 0 #
Selftest (only Dancall HP2731):	* # 9 9 9 7 #
Show version configuration:	* # 9 9 9 8 #
Net Monitor:	* # 9 9 9 3 #
Ericsson
IMEI number:	* # 0 6 #
Software version:	*
Dafault Language:
Enter to phone menu without SimCard - after Wrong PIN:	press NO: * * 0 4 * 0 0 0 0 * 0 0 0 0 * 0 0 0 0 #
Information about SIMLOCK:
Hagenuk
IMEI number:	* # 0 6 #
Software version:	# # 9 1 4 0 * 8 3 # 7 5 * 2 #
Mitsubishi
View IMEI:	* # 06 # View IMEI
Default language English:	* # 0044 # English
JDefault language Deutch:	* # 0049 # Deutsch
NetMonitor1 activate:	hold * enter 4329
NetMonitor2 activate:	hold * enter 621342
Enter into M4 Test mode:	hold * enter 5472
Show SW version:	hold * enter 5806
Show HW version:	hold * enter 5807
Show SW and HW version:	hold * enter 936505
NS Lock Menu:	hold * enter 476989
CP Lock Menu:	hold * enter 482896
NS Lock Menu:	hold * enter 574243
SP Lock Menu:	hold * enter 967678
IMSI Lock Menu:	hold * enter 362628
Lock net.level:	hold * enter 787090
Lock net.level:	hold * enter 787292
Shut Down:	hold * enter 3926
Motorola
IMEI number:	* # 0 6#
Net Monitor ON:	* * * 1 1 3 * 1 * [OK]
Net Monitor OFF:	* * * 1 1 3 * 1 * [OK]
* - press this until box shown up
Nokia
IMEI number:	* # 0 6 #
Software version:	* # 0 0 0 0 # lub * # 9 9 9 9 #
Simlock info:	* # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate:	* 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate:	* 4 7 2 0 #
Provider lock status:	# p w + 1 2 3 4 5 6 7 8 9 0 + 1
Network lock status:	# p w + 1 2 3 4 5 6 7 8 9 0 + 2
Provider lock status:	# p w + 1 2 3 4 5 6 7 8 9 0 + 3
SimCard lock status:	# p w + 1 2 3 4 5 6 7 8 9 0 + 4
1234567890 - MasterCode which is generated from IMEI
Philips
IMEI number:	* # 0 6 #
Simlock info:	* # 8 3 7 7 #
Security code:	* # 1 2 3 4 # (Fizz) or * # 7 4 8 9 #
Samsung
IMEI number:	* # 0 6 #
Software version:	* # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor:	* # 0 3 2 4 #
Chaning LCD contrast:	* # 0 5 2 3 #
Memory info:	* # 0 3 7 7 # albo * # 0 2 4 6 #
Reset memory (SIMLOCK`a removing!!!):	* 2 7 6 7 * 3 8 5 5 #
Reset CUSTOM memory:	* 2 7 6 7 * 2 8 7 8 #
Battery state:	* # 9 9 9 8 * 2 2 8 #
Alarm beeper:	* # 9 9 9 8 * 2 8 9 #
Vibra test:	* # 9 9 9 8 * 8 4 2 #
Sagem
IMEI number:	* # 0 6 #
Service Menu access:	MENU 5 1 1 #
Siemens
IMEI number:	* # 0 6 #
Software version:	put off sim card and enter:: * # 0 6 # (and press LONG KEY)
Bonus screen:	in phone booke: + 1 2 0 2 2 2 4 3 1 2 1
Net Monitor (S4 Power):	Menu 9 8, left SoftKey, 7 6 8 4 6 6 6, Red phone, Menu 5 6
Sony
IMEI number:	*#06#
Software version:	*#8377466#
Show list of product creator names:	(you must save this number in your Phone Book with "own phone no." record): + 1 2 0 2 2 2 4 3 1 2 1

 

Sagem Mobile Sets Secret Codes

IMEI number: * # 0 6 # 
Service Menu access: MENU 5 1 1 # 

Mitsubishi Mobile Sets Secret Codes

View IMEI: > * # 06 # View IMEI 

 Default language English: * # 0044 # English 

 JDefault language Deutch: * # 0049 # Deutsch 

 NetMonitor1 activate: hold * enter 4329 

 NetMonitor2 activate: hold * enter 621342 

 Enter into M4 Test mode: hold * enter 5472 

 Show SW version: hold * enter 5806 

 Show HW version: hold * enter 5807  

 Show SW and HW version: hold * enter 936505 

 NS Lock Menu: hold * enter 476989 

 CP Lock Menu: hold * enter 482896 

 NS Lock Menu: hold * enter 574243 

 SP Lock Menu: hold * enter 967678 

 IMSI Lock Menu: hold * enter 362628 

 Lock net.level: hold * enter 787090 

 Lock net.level: hold * enter 787292 

 Shut Down: hold * enter 3926 

Hagenuk Mobile Sets Secret Codes

IMEI number: * # 0 6 # 
Software version: # # 9 1 4 0 * 8 3 # 7 5 * 2 # 

Alcatel One Touch Easy Secret Codes

To view IMEI (International Mobile Equipment Identity) number enter 
*#06# 

To Enter Service Menu enter: *#000000# 

To view Secret Menu type 000000 then press * 

Secret Menu Appears 
TRACES channel indicator menus 
ARRETS - ? 
VIDER ARRETS Press OK and the phone responds: This action is executed! 
CTRL CHARGE It show the charger voltage and battery voltage. 
DAMIER display test 

The Service provider (SP) lock is used to lock the cell phone to the 
SP's SIM card. Once the cell phone is locked to a specific operator, 
if one inserts a SIM card from a different operator the phone will 
refuse to accept it! The cell phone will however accept another SIM 
card from the same operator. 

Removing SP lock on Alcatel Easy 
This is how to remove the SP lock on Alcatel (one touch) Easy. 
(You wil need a cable, a eeprom device and some sw) 

Edit the eeprom: 

Address Replace with 
------------- --------------- 
176h FFh 
177h FFh 

Alcatel HC 600, 800, 1000 Secret Codes

To view IMEI (International Mobile Equipment Identity) number enter 
*#06# returns IMEI number and Software Version (not HC600). 

These are the pinouts for the HC600 they are the same as the 
800/1000 I beleive. 

1 3 5 7 9 11 13 15 

I I I I I I I I 

O O 17 

I I I I I I I I 

2 4 6 8 10 12 14 16 

1 Vbat_ext 9 SDA_E 

2 EMMI_PAE 10 GND 

3 Mic 11 GND 

4 EMMI_OPE 12 DC_IN (charge) 

5 GND 13 Speaker 

6 EXT_EMET 14 MARCHE 

7 SCL_E 15 DC_IN (charge) 

8 EXT_RECDIT 16 GND 

17 Antenna+internal switch (int/ext)

Bosch Mobile Sets Secret Codes

IMEI number: * # 0 6 # 
Dafault Language: * # 0 0 0 0 # 
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 # 

Dancall Mobile Sets Secret Codes

IMEI number: * # 0 6 # 
Software version: * # 9 9 9 9 # 
SIMcard serial number: * # 9 9 9 4 # 
Information about battery status: * # 9 9 9 0 # 
Selftest (only Dancall HP2731): * # 9 9 9 7 # 
Show version configuration: * # 9 9 9 8 # 
Net Monitor: * # 9 9 9 3 #